Product Details
Product name |
Stainless Carabiner Mug |
Item Number |
BR-0001 |
Capacity |
300ml |
Weight |
140g |
Size |
76*90 mm |
Logo |
Customized (Silk/Heat transferprinting/Laser printing) |
Packing |
1 opp bag+white box/pcs,60pcs/ctn (Can be customized) |
Carton size |
47*42*30.5cm |
Material |
Stainless steel |
Product Details
1. This type of cup has double wall.Materials can be customized according to customer requirements.(304 /201/304 with 201).
2. Color: spray paint/plastic spray (The customer just selects pantone color).
3. Handle with various colors.
4. Europe & US standard.
5. Sample time:
1) Existing : 1-2 days
2) Silk printing and laser printing : 3-5 days
3) Heated transfer printing : 10-13 days
6. Multiple capacities are available:
Capacities |
220ml |
300ml |
350ml |
400ml |
450ml |
Size:(mm) |
D70*H80 |
D76*H90 |
D79*H90 |
D82*H100 |
D85*H105 |
Single n.w. |
110g |
140g |
140g |
170g |
185g |
QTY/CTN |
100PCS |
60pcs |
60pcs |
60pcs |
48pcs |
CTN SIZE:(cm) |
52.5*39.5*36.5 |
47*42*30.5 |
59.5*36*30.5 |
56.5*37*34 |
50*38*39.5 |
Brief Introduction To Trademark Process
1. Screen printing - Using a special printing process to print the patterns and words you want, you can print in all the colors you need, it is the most commonly used printing process, the logo is obvious, the color is bright.You can also customize the color according to your requirements
2. Heat transfer - Design and produce heat transfer film according to customer requirements, transfer the pattern to the surface of the workpiece through hot pressing, improve the product grade.
3. Water transfer printing - A printing process in which transfer paper or plastic film with colored patterns are hydrolyzed by macromolecules under water pressure.
4. Laser marking - the laser etched patterns and text on the stainless steel part of the cup body, with a single color, patterns and text will not wear away.
5. Imprint - Place the plate between the upper and lower dies and squeeze the outer material under pressure.A molding method in which material is filled in the concave and convex cavity of a mold cavity, with undulating fine lines, and the surface of the workpiece is undulated to form undulating bulges and shapes or flowers.
6. Electrocorrosion - This is achieved by printing the desired pattern and text with chemical potions, and by etching the surface layer of the material.
http://www.brmugfactory.com/